Railway sector
CORD/CAVI/SIL-NA/8
CORD/CAVI/SIL-NA/8 is a rubber hose for cooling water circulation in the engines.
Designed for the heating of cabs and wagons of railcars, water inlet and discharge from the engine to the boiler, three-way-piping, transport of cooling water to the gearbox system.
Good resistance to mineral oil mist.
More detailsMain benefits
The hose complies with UNI EN 45545-2:2020 requirements (Fire protection on railway vehicles) for Hazard Levels HL1, HL2 (requirement set R22) and HL1, HL2, and HL3 (requirement set R23).
Construcion
TUBE
Silicone rubber, self-extinguishing, black colour, smooth.
REINFORCEMENT
Tear resistant plies of synthetic cord.
COVER
Silicone rubber, black, smooth, self-extinguishing, cloth finish.
Temperatures
From -60°C up to +200°C.
Note
DIELECTRIC STRENGTH
- ≥ 5000 V/mm.
LENGTH
- Standard supply in pre-cut service lengths, or upon request in 19.5m coils with a MINIMUM BATCH of 39m or multiples thereof.
Norms Compliance
- Technical Specification FS 374208 rev. 00.
- EN ISO 4589-2 (Fire behaviour by oxygen index).
- EN ISO 5659-2 (Optical density).
- NF X 70-100-1/2 (Toxicity of gases).
Dimensional tolerance
Diametro interno: ISO 1307 - Spessore parete: DIN 7715 T4 S2 - Lunghezza: ISO 1307
Chemical resistance acc. to MTG Chemical Resistance Chart. Sizes and colours are available upon request. Please contact our Sales Department.
The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.
The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.
The selection of fittings for our hoses should be made in accordance with the recommendations provided in ISO 8331: "Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance."