Dredging and abrasive materials
GHIBLI/SPL/10
Suction and delivery hose for pneumatic and/or hydraulic transport of abrasive products.
GHIBLI/SPL/10 is normally used in construction/shipbuilding, extractive, steel and mining companies and other industries.
More detailsConstrucion
TUBE
- NR/SBR rubber, black colour, antistatic (R<1 MΩ), resistant to abrasion, smooth.
REINFORCEMENT
- High strength plies of synthetic cord.
- Embedded steel helix wire.
COVER
- NR/SBR rubber, resistant to abrasion and weather. Black colour, smooth, cloth finish.
Safety factors
- ≥ 3 times working pressure.
Temperatures
- From -30°C to +70°C.
- Peaks up to + 80°C depending on the products conveyed.
Note
- If required, it is available in service lengths with cuffs at the ends.
Fitting
- By means of clamps, collars, pressed-in couplings or other systems needed by the equipment manufacturers.
Marking
Dimensional tolerance
Inner diameter: ISO 1307 – Wall Thickness: DIN 7715 T4 S2 – Length: ISO 13077
Other sizes and colours are available upon request. Please contact our Sales Department.
Above technical data refer to application at room temperature (+20°C).
The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.
The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.