GHIBLI/SPL/10

GHIBLI/SPL/10: Suction and delivery hose for pneumatic and/or hydraulic transport of abrasive products

APPLICATIONS

Suction and delivery hose for pneumatic and/or hydraulic transport of abrasive products.

GHIBLI/SPL/10 is normally used in construction/shipbuilding, extractive, steel and mining companies and other industries.

    Request more information

    Fill out the form below and send!

    MIN. BENDING RADIUS

    • 6 times the inner diameter.

    TEMPERATURE RANGE

    • From -30°C to +70°C.
    • Peaks up to + 80°C depending on the products conveyed.

    WORKING PRESSURE

    • 10 bar.

    SAFETY FACTOR

    • ≥ 3 times working pressure.

    MARKING

    Suction and delivery hose for pneumatic and/or hydraulic transport of abrasive products.

    COSTRUCTION

    TUBE

    • NR/SBR rubber, black colour, antistatic (R<1 MΩ), resistant to abrasion, smooth.

    REINFORCEMENT

    • High strength plies of synthetic cord.
    • Embedded steel helix wire.

    COVER

    • NR/SBR rubber, resistant to abrasion and weather. Black colour, smooth, cloth finish.

    FITTINGS

    • By means of clamps, collars, pressed-in couplings or other systems needed by the equipment manufacturers.

    NOTE

    • If required, it is available in service lengths with cuffs at the ends.

    DOWNLOAD THE DATA SHEET IN PDF

    SIZE TOLERANCES

    Inner diameter: ISO 1307 – Wall Thickness: DIN 7715 T4 S2 – Length: ISO 13077

    Other sizes and colours are available upon request. Please contact our Sales Department.
    Above technical data refer to application at room temperature (+20°C).

    COD. ITG0023
    UPDATED: 04/18
    Rev: 001

    Top